Remote DMX Controller

1.This unit is a standard DMX 512 controller which has 54 or 63 channels output. 2.There are maximum 9 LED fixtures.

Introduction:

*  There are max.9 LED fixtures can be controlled and each fixture is up to 6-7 DMX Channels.

   In order to control different brand of LED fixture there is a fixture library which has 9 kinds

   of DMX channels set up.

*  There are 9 programmable chases for user and each chase has up to 50 scenes.

    In the meantime you can control output, speed, fade and strobe.

*  There are 8 preset patterns are corresponding to different led fixture.

 Function:

* According to your fixture you should select one of DMX channel set up from fixture library then you can control you fixture well.

Press and hold up EDIT 3 seconds then LED will flash which means the unit is in PROGRAMING. Now press FIX1 and FIX2 at same time STEP display will show “L0-7”. Then you can select “L0” to “L7” to corresponding to your fixture. Now you can use slider of channel to check up your fixture. If it is right you can exit the selection of DMX channel set up. Press and hold up FIX1 and FIX2 in the meantime then you will see STEP and PROGRAM display will flash 3 times which means it exit. Or you can push EDIT 3 seconds to exit.

CHANNEL NAME	Red	Green	Blue	White	Strobe	Master	TOTAL CHANNELS
CONTROLLER   CHANNEL	CH1	CH2	CH3	CH4	CH5	CH6
LIBRARY NAME
L0	CH1	CH2	CH3	CH4	CH5	CH6	6CH
L1	CH1	CH2	CH3	CH5	CH4	CH6	6CH
L2	CH1	CH2	CH3	CH4	CH5/CH6=0	CH7	7CH
L3	CH6	CH1	CH2	CH3	CH4	CH5	6CH
L4	CH1	CH2	CH3	NO	NO	CH4	4CH
L5	CH1	CH2	CH3	CH4	NO	CH5	5CH
L6	CH1	CH2	CH3	CH4	NO	NO	4CH
L7	CH1	CH2	CH3	CH4	CH5/CH7=0	CH6	7CH
L8	CH1	CH2	CH3	NO	NO	NO	3CH

                 

NOTE: after you select different fixture library the channel output will be not continuous.

                Example:

                 After you select“L1 ”

                 When you select FIX1 and press, the output channel will be: CH1, CH2,CH3,CH5,CH4,CH6.

                 Then after you press FIX2 the output channel will be CH7,CH8,CH9,CH11,CH10,CH12.

                 Then other FIX output will be like upper arrangement.

           Another: after you select “L8”, there are three slider will be used.

                   When you select FIX1 the output channel will be CH1,CH2,CH3, slider 4, 5,6 are invalid.

                   Then after you press FIX2 the output channel will be CH4, CH5, CH6.

                    Then other FIX output will be like upper arrangement.

           Another : after you select “ L2” and press FIX1 the output channel will be CH1,CH2,CH3,CH4,CH5+CH6,CH7

                 Then after you select FIX2 the output channel will be:CH8,CH9,CH10,CH11, CH12+CH13,CH14

                 Then other FIX output will like upper arrangement

Tachnique data: 

*     Power supply: DC 9V / 500mA

*     DMX interface: XRL 3P

*    Dimensions: 29X15X7cm

*    Weight: 1.30kg 

Note:

      Atter you finish you can auto running, sound control or manual control them.

Remote DMX Controller