DMX 512 WIRELESS CONTROLLER

1.DMX -512 Wireless receiver/transmitter. 2.Can ensure without any time delay when signal data is transmitting. 3.126 Channels

   

Introduction:

DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data (generated by console )by wireless way, which solves lighting control issues of wireless transmitting completely between console and lighting, lighting and lighting and so on, it get rid of connecting cable limited completely

And also can ensure without any time delay when signal data is transmitting, signal data is real time and reliably.

126 channels jumping frequency automatically,high anti-jamming ability.

   

      

Operating manual:

1.ID code and LED color corresponding relate ship:

1:0

2:1

3:2

4:3

5:4

6:5

7:6

8: 7

9: 8

10: 9

11: A

12: B

13: C

14: D

15: E

16: F

2.Press key 1 time to indicate ID setting, Press again to set ID,then ID value adding 1 each time by press

3.Working condition:

Enter DMX mode: display ID code, green LED flash

Enter Wireless mode: display ID code, green LED flash

4.RF frequency- - - - - - - - - - - - 2. 400-2. 525 G,total 126 channels,it’s searching automatically.

5.ID Code- - - -“1-7” groups ID code,press ”KEY” for setting,it only can works under same ID code. Of transmitter and receiver.

  

Establishing Communication:

1.Power on DMX512 wireless received board and transmitted board.

2.Press “Key” button to set same ID value of transmitted board and received board., please use different ID value if you need use more than 1 group wireless net at same time in same place.

3.The red LED flash when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flash till received corrected same ID value, LED flash more fast once DMX data more fast.

4. Communication was established correctly then

DMX 512 WIRELESS CONTROLLER